Ground Shark™ SD Brush Cutter

STANDARD DUTY BRUSH CUTTERS The Ground Shark®

Standard Duty Brush Cutter is designed to clear light to medium density brush and hardwoods up to 4" diameter. The Ground Shark direct drive system runs efficiently, smooth and quiet while cutting the toughest material.  Low-profile design slips easily under fences. The perfect general purpose brush cutter for routine land maintenance. 

CUTS UP TO FEATURES UP TO 4" DIAMETER MATERIAL

UP TO 78" CUTTING WIDTH

3 BI-DIRECTIONAL CUTTING BLADES

Features

• 4 Dual pressure reliefs on the hydraulic motor allow for  bi-directional operation protect against pressure spikes that could damage the drive system.
• Bi-directional forged steel blades (3) allow operator to cut in both directions extending operational life and reducing maintenance cost by cutting heavier brush in one-direction and grass or smaller vegetation in the other.
• The Ground Shark line of brush cutters include special hydraulic valving to shut the cutter head down quickly and safely. There is a distinct audible sound during the  shutdown which will indicate to the operator that the blades are coming to a stop.
• Direct drive motor for efficient performance.
• Deck steps on both sides to facilitate different carriers with entry on left or right side. Hose routing can also be  configured on either side.
• Deck Leading Edge Radius Guide enables smoother material glide path.
• .25 thick steel deck design.
• Bolt-on replaceable skid shoes.
• An optional MulchPower™ gauge is visible to the operator and helps prevent excessive stalling and overheating.
• Optional dual wheel kits are available that mount to the underside of the front deck to keep the blades off the ground and prevent scalping

** Many of the Standard Duty Cutters are under the QUCK SHIP PROGRAM. This means they are in stock and ready to ship from Paladin

** Always protect the operator and the people around this attachment when it is operating. LEC highly recommends using a shatter proof guard or door on the skid steer to protect the operator. Please call if you need assistance purchasing a protective door.

MULCHPOWER™ PRESSURE GAUGE (OPTIONAL)

Paladin MulchPower™ Technology provides live, dynamic power and loading feedback to the operator through a unique pressure monitoring gauge.  With MulchPower™ operators can see when the tool is fully charged and also when it is nearing a state of being overloaded, so that operating technique can be adjusted to maximize performance. 

• RUN AT PEAK POWER: Greater starting power improves cutting efficiency  and tool life, increasing overall job productivity and decreasing total   operating costs.
• AVOID STALLING: Greater starting power dramatically reduces the likelihood  of stalling.
• WORK WITH CONFIDENCE: Conditions change from job to job. MulchPower™  lets you be more aggressive when the job will allow it, letting you maximize  your production.
• GREEN - Optimal Operating Pressure
• YELLOW - Approaching Attachment Stall Pressure
• RED - Attachment Stalled/Not Recommended Operating Pressure

SPECS

The SD cutter is for general grounds maintenance. This cutter has a gear type motor and can handle up to 4" material.